FN 400
Type series FN 400
GMN complete units with press fit at outer ring and keyway at inner ring
- shaft diameters 15 to 40 mm as standards
- complete unit with ball- and roller bearing support
- clutches are just rust protected but not lubricated
- keyway according DIN 6885 Bl.1
- standard design with FE 400 (M) inserts - on request available with FE 400 Z inserts - please add suffix "Z" to your order.
| No. | Shaft Diameter d [mm] | Outer Diameter D [mm] | Width b [mm] | Torque M [Nm] |
| FN 437 M | 15 | 41 | 27 | 176 |
| FN 437 Z | 15 | 41 | 27 | 160 |
| FN 442 M | 20 | 46 | 27 | 223 |
| FN 442 Z | 20 | 46 | 27 | 208 |
| FN 453 M | 25 | 58 | 27 | 343 |
| FN 453 Z | 25 | 58 | 27 | 314 |
| FN 459 M | 30 | 64 | 27 | 411 |
| FN 459 Z | 30 | 64 | 27 | 381 |
| FN 463 M | 35 | 68 | 27 | 461 |
| FN 463 Z | 35 | 68 | 27 | 427 |
| FN 470 M | 40 | 75 | 27 | 550 |
| FN 470 Z | 40 | 75 | 27 | 509 |
| FN 473 M | 45 | 78 | 27 | 588 |
| FN 473 Z | 45 | 78 | 27 | 544 |
If you want to know more, please contact us as follows:
NEED BEARINGS LIMITED
www.needbearings.com
Skype: needbearings.joy
Email: joy@needbearings.com
whatsapp:+86 182 0611 2659
没有评论:
发表评论